Installing an EV charger at home ensures you start your day with a fully charged car that can take you anywhere. Also, you won’t have to find a charger along the way, especially when leaving the house with an almost empty battery. Isn’t it better to leave in the morning without a problem?
There are three EV charger types, each of which has a different purpose. Electricians Team Pasadena will help you understand each type of charger and how you can install them with no hassle.
- Level 1 Charger
Level 1 chargers come with the car. These chargers don’t require installation because you can instantly plug them into a 120V power outlet, and you’re good to go. Ensure that you have a place to park your car with an outlet near you. This way, you won’t have to install an outlet which would mean extra cost. Ensure to take care of your EV charger to avoid availing of an EV charger repair. But, if it’s inevitable, only get the best.
- Level 2 Charger
A level 2 charger is more complicated to install since it requires a 240V outlet. Here is what you need to get started on the repair:
- The required electrical outlet
- The right plug
- Proper amperage setting
- Correct wire length from the carport to the outlet
Follow these steps for easy installation:
You need to install a double-pole circuit breaker to two 120V buses to double the voltage of the 120V outlet. You may also have to replace your entire breaker box to accommodate a level 2 charger. If viewed from a wiring perspective, you need to attach a ground wire to the ground bus bar. Also, attach two hot wires to the double pole breaker.
Do these steps, and you’ll have a successful installation of a 240V outlet. Installing a level 2 charger will be easy if you know electrical wiring. But, if you are unsure, you can always ask for help from a reputable electrician since there are risks involved when doing an electrical wiring installation yourself.
- Level 3 Charger
Level 3 chargers are used for commercial purposes. These chargers are what you use when you charge your EV in a public charging station. These chargers require a large power supply that ensures your car will fully charge in minutes.
The Cost of Installing An EV Charger
Getting EV charger services is the right choice to ensure you always have a fully charged car. Let’s find out the cost of installing an EV charger. Here is the breakdown:
- Electrical Vehicle Supply Equipment (EVSE)
An Electrical Vehicle Supply Equipment or EVSE is hardware and one of the main components for a successful electronic vehicle car charger installation. The EVSE is a device that safely transfers electricity from the power outlet to your electric car. There are many manufacturers of EVSE, so the price varies depending on the company. The hardware ranges from $1,200 to $3,500 per charging port.
- Engineering and Charging Port Design
For a successful installation, ensure you get a professional to engineer and design your charging station. You cannot just set up an EV charging port without planning the structure, the area where you’ll put the charger, and if weather conditions will affect the charger.
Two components are needed before starting the installation: a construction drawing and a permit, especially if you have a major reconstruction to install a new charger. Since you will be paying for the time and effort of the design, the whole process will cost about $1,500 to $5,000.
- Getting a Permit
Permits are a requirement to start any construction. You can get a permit once you have completed all the requirements and started the construction. Depending on your location, getting a construction permit is around $150 to $500.
- Construction
With all permits ready, you can start constructing your EV charging station. All materials, labor, and other fees depend on where you live, ranging from $1,200 to $3,500.
A rough estimate of around $3,000 to $8,000 is the cost of installing a new EV charger. The cost is quite expensive, so opt for a reputable installation company like Electricians Team Reseda for professional installation that will last a lifetime.
Following the simple steps to install an EV charger will ensure that you’ll have a hassle-free installation process even without professional help. But remember to do these steps only if you know about installing an EV charger. Installing any electrical wiring system is risky, even for professionals. So, ensure you are prepared.
If you don’t have prior experience, get help from a professional electrician immediately. Electricians Team Reseda is a top-quality electrical company that will help you achieve your car charging station goals.
Read more about Electricians Team Reseda for tips and tricks on all things electrical! We’ll help you install or repair your electrical wiring and can provide you with amazing services if you need them, so call us immediately.
